Clik here to view.
AppInsight for Exchange (SAM 6.1) Mailbox size vs Attachment Size
Can anybody explain why the mailbox size can be smaller then the attachment size? I'm seeing this on a lot of our mailboxes. I pasted an exampled of 4 of them where the reported mailbox size is...
View ArticleApplication availability report based on status type
I was trying to figure out how to write a report for an application monitor of ours. I found the default availability reports for application monitors will just give 100% availability for any status...
View ArticleSNMP with multiple NICs
I have a server with 2 NICs. One is being polled by solarwinds, the other will be polled by an SNMP agent on a load balancer. However, since installing and configuring SNMP, only the NIC used for...
View ArticleIBM Fabric EN4093R 10Gb Switch "Data is not available"
The IBM Flex System Fabric EN4093R 10Gb Scalable Switch haas been managed for a while now;it reports some basic data, but the critical informationi is all "Data is not available". All the help says is...
View ArticleHow do I duplicate tickets?
I need to duplicate tickets, know how to merge i dont want to do that i want to create multiple of the same.
View ArticleClik here to view.
Overlapping Permissions
How does Orion handle overlapping permissions? If a user is a member of two different groups and each of those groups has a different set of permissions, how does Orion handle this? Thanks in advance...
View ArticleIs Web Help Desk OK with just one window?
In this thread about wanting multiple windows in Web Help Desk, I lament that it's one window per browser. Let's ask the converse: Web Help Desk users - how is it with only being able to open one...
View ArticleOSPF on layer 2 trunk port?
Hello, I was setting up a lab and I stumbled across this question. How do you advertise routes over a layer 2 trunk port? I have Cisco 1921 R1 that has a serial connection to R2, both routers are...
View ArticleIssues installing NTA 4.0
Hello, I am using the setup where I have an NPM/NTA on one server and the NTA database on a completely separate server. I've installed the NTA4.0 on the NTA database server. After that I tried to...
View ArticleClik here to view.
Incident Management and Alerts
Almost all of our alerts are feeding our incident tracking system by opening/closing incidents when an alert happens within the environment. Since this monitoring is statefull the incident will be...
View ArticleClik here to view.
Where are stored SNMP settings in Linux 2.6.18?
where are stored SNMP settings in Linux 2.6.18?
View ArticleWPM - getting started with Azure
Hi All, Currently in evaluation mode with WPM and have come across two particular issues. It works perfectly for one of our websites (and impressed with the results), but am having issues with another...
View ArticleIs it possible to have more than one polling IP address?
Hi Guys,I'm here again. Please don't get tired of me and my questions; that's the only way I can learn.Anyway, I have an issue which is NPM-related. In my work environment, the polling IP addresses of...
View ArticleNCM CISCO CONFIG
Hi Team, I am looking for a cisco device config template to configure NCM.With this configuration I should be able to Push / Backup configuration / Generate reports / Match Old and New configsBasic...
View ArticleProblema IP SLA VOIP RTP
Pessoal, Estou com o seguinte problema: configurei em um router o IP SLA usando VOIP vejam:voip rtp 192.168.122.252 source-ip 10.2.110.2 source-voice-port 0/1:8 codec g729a duration 30 advantage-factor...
View ArticleClik here to view.
Device Studio, i.e. Manage Pollers inline help links are empty
You have several links on the Manage Pollers page that offer to help me "Learn More". These links take me to blank sections of the online help file, with only the descriptions of the sections as...
View ArticleHaving a Trap create an Event is needed.
If everything else creates an Event, why doesn't a Trap create an Event. A Trap should create an Event then the Traps can be seen in Context with all the other Events.
View ArticleIndicating if an alert is NEW or RETRIGGERED via ${SQL:} variable
I've been trying to brainstorm this but I've hit a roadblock in knowledge and I'm looking for help. I've got a query that is looking at the AlertStatus table and the triggertimestamp column in that...
View ArticleInternal hostname lookup functionality
The current nslookup functionality uses external services and cannot see or resolve internal system names. We are running "ping- a [ip]" commands by hand to get name resolution on internal systems.
View Article